#For frequencies between 7.68MHz and 8.0MHz it is recommended to use the ZTA CC MG series as the characteristics are better.

Issue : 7 C1r

Date : 28/09/05

± 0.4%

± 0.3

Part Type/

Frequency

Test IC

Number

In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice

ISO9001:2000 Registered

C1 & C2

15 ) External Capacitor.

50.01 ~ 60.00

5 )

20.01 ~ 25.99

74HCU04 x 2

Tel :

0044 (0)118 979 1238

Fax :

0044 (0)118 979 1283

email :

info@actcrystals.com

Please note that all parameters can not necessarily be specified in the same device

(Ext. & Int.l)

Accuracy (%)

Stability over

Aging over

Capacitors (pF)

Frequency

30 )

30 External Capacitor.

± 0.3

(-20 ~ +80°C)

± 0.4%

13.01 ~ 20.00

7.68 ~ 13.00

CD4069UBE x 2

± 0.5

26.00 ~ 50.00

Specification may vary from above please enquire

± 0.5

ACT ZTACV SMD Resonators

Specification

ZTACV MX

The ACT ZTACV family comprises of a range of surface mount, ceramic resonators ("chip"

type) in two pad format. This family offers a cost effective solution to those applications where a

wide temperature range, accuracy, small size and surface mounting are the requirements.

temp. range

Ten Year (%)

ZTACV MT#

Range (MHz)

For quotations or further information please contact us at:

3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK

http://www.actcrystals.com

Customer to specify : Frequency, Package Type and Size

Important note when using Ceramic resonators with micro controllers

Some resonator parameters vary considerably with frequency and physical construction/size . These differences are

too great to be able to be practically shown in a data sheet.

However, these parameters can be critical when the resonators are used with micro controllers. Even if two different

resonators appear to have the same specification the typical values of these critical parameters can be considerably

different. When enquiring about resonators for use with micri controllers it is important to supply the make and part

number of the IC to be used and/or the list of recommended resonators, if this is given.