| 전자부품 데이터시트 검색엔진 |
|
PAPR1 데이터시트(PDF) 17 Page - Clarke International |
|
|
|||||||||||||||||||||||||||||
PAPR1 데이터시트(HTML) 17 Page - Clarke International |
|
17 / 24 page ![]() 17 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com SENSITIVITY CONTROL The sensitivity can be set from LOW to HIGH using the dial knob. The LOW setting suits excess ambient light or with another welding machine close by. The HIGH setting suits low amperage welding and welding in areas with low light conditions, especially low amperage argon arc welding. Selections between LOW and HIGH are suitable for most of indoor and outdoor welding. DELAY CONTROL When welding ceases, the viewing window automatically changes from dark back to light but with a pre-set delay to compensate. The delay time can be set from MIN (0.1 sec) to MAX (1.0 sec) using the dial knob. The minimum delay suits spot or short welds. The maximum delay suits heavy current welding and reduces eye fatigue from the arc. Selections between MIN and MAX are suitable for most indoor and outdoor welding operations. SELECT THE GRINDING SETTING The headshield has a ‘Grinding’ setting on the selector panel. When set to ‘Grind’ the auto darkening function is disabled. The headshield then provides eye and face protection for sparks and airborne particles created during grinding activities. DO NOT WELD WITH “GRIND” SELECTED. |
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |