| 전자부품 데이터시트 검색엔진 |
|
PAPR2 데이터시트(PDF) 10 Page - Clarke International |
|
|
|||||||||||||||||||||||||||||
PAPR2 데이터시트(HTML) 10 Page - Clarke International |
|
10 / 24 page ![]() 10 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com To Stop: Press Off button 1 seconds until the audible alarm and blower stop. The Danger indicator light comes on, the alarm sounds and the blower vibrates if battery power is low or air flow is reduced due to a dirty filter, blocked breathing tube or other fault. The Battery Level indicator light shows the power remaining in the battery. • Green light goes on: battery level > 90% • Yellow light goes on: 30% battery level < 90% • Red light goes on: 10% <battery level < 30% • Red light flash: battery level < l0% TESTING THE AIR-FLOW Disconnect the breathing tube from the hood. Insert the flowmeter into the breathing tube. Hold the flowmeter straight up and start the blower. The flowmeter ball should be above the MIN mark. If the flowmeter reads MIN or below, check the battery and filter elements. 1. Flowmeter 2. Breathing Tube Connector 3. MIN mark TESTING THE AIRFLOW ALARM Disconnect the breathing tube from the hood. Start the blower and block the air flow by placing your hand over the end of the breathing tube. If the alarm does not sound and the blower does not vibrate, check the battery and filter element. |
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |