LD155

T: +44 (0)1322 527 629

E: light@lightgraphix.co.uk

www.lightgraphix.co.uk

Page 4 of 11 | Data sheet issued: 22 May 2026

360° Rotation

25° Tilt

ADJUSTABLITY

FIXING OPTIONS & DIMENSIONS

Dimensions in mm

/SC Spring clips

Suitable for use in surfaces with a thickness of 1mm –

25mm. Spring clips provide a simple, single fix mounting

method. We recommend that spring clips are only used in

interior applications.

/485S Fixing sleeve and O-rings

Acetal sleeve is bonded into the mounting surface first

and the fitting is held in with O-rings. We recommend this

method for mounting in exterior in-ground applications.

/485GT Ground tube

Designed for soil or gravel surfaces. It is supplied with the

fixing sleeve bonded into the tube and can be cut down on

site. The tube can be buried with the necessary wiring via

the PG9 IP67 gland and then the fitting installed after the

landscaping work has been completed.

/485N Concrete Housing

The aluminium housing is used as a heat sink which keeps the LED fitting cool through the thermal transfer of the heat within the housing to the surrounding concrete. The housings are big

enough for IP rated connections to be made inside and a second gland is available for cabling onto the next luminaire.

/SC

Mounting Springs

Ø100

30 71 85

Ø80

Cut-out Ø86

3

25° Tilt

/485N

Concrete Can Housing

Ø170

Ø89

3

24

92

/485S

Mounting Sleeve

Ø100

34 71 85

Ø80

Cut-out Ø86

3

/485GT

Ground tube

120

3

Ø100

Ø100

Ø100

Ø80

Ø80

Cut-out

Ø86

Cut-out

Ø86

71

71

30

34

3

3

85

85

25° Tilt

25° Tilt

Ø100

3

120

/485N

Concrete housing with 1x PG9 IP67 gland

/485N-2

Concrete housing with 2x PG9 IP67 gland

Ø100

Ø170

92

3

24