A22Z-R25 datasheet(28/30 Pages) OMRON

28 / 30 page

A22

Affixing Character Film

• Hold the Cap, remove the cardboard on the Film, and attach the

Film to the Cap. Make sure that the protruding portions of the Cap

engage he cutout portions of the Film and that the characters are

aligned parallel to the imaginary line connecting the two protruding

portions to the left and right of the Cap.

Mounting and Dismounting Snap-in Legend

• Press and secure the Snap-in Legend Plate onto the Legend Plate

Frame.

• The direction of the characters will vary with the mounting direction

of the control panel if the Switch is a knob or key selector model.

• To easily remove the Snap-in Legend Plate from the Legend Plate

Frame mounted to the panel, insert a Tool with a thin tip into the

space between the Snap-in Legend Plate and the Legend Plate

Frame.

• The Snap-in Legend Plate is easily removed by pressing the Snap-

in Legend Plate from the back of the Legend Plate Frame.

• The Legend Plate Frame is made of acrylic resin, which is easily

damaged by shock. Be sure to handle the Legend Plate Frame with

care.

Engraving Method

Material: Acrylic

• Engrave the characters directly on the matted side of the Snap-in

Legend Plate.

• The characters must be engraved no deeper than 0.5 mm.

• Apply alcohol-based paint coating to the engraved characters.

• If the Snap-in Legend Plate is transparent, engrave the mirror-

written characters on the back of the Snap-in Legend Plate and

apply paint coating to the characters. Then apply paint coating of a

different color to the remaining part of the Snap-in Legend Plate.

Mounting Three-throw Spacer

Press and secure the two protruding portions of the Three-throw

Spacer to the two indented portions of the inner side of the control

panel.

Protruding portions on Cap

Remove the

cardboard.

Legend Plate Frame

Snap-in Legend Plate

Concave surface

A22Z-R25 데이터시트(PDF) 28 Page - Omron Electronics LLC