L8229 datasheet(27/42 Pages) STMICROELECTRONICS

27 / 42 page

Obsolete

Product(s)

- Obsolete

Product(s)

L8229

L8229_0 and L8229_1 modes

27/42

8.4.1

Reading back SPI.

When W2 bit 11 to 13 are to 111, read back from SPI is enabled. This function is to check

the actual data in W0 and W1; W2 can’t be read back.

To read back the following procedure is requested:

Set PROG1=1, PROG2=0

Write W0 and W1 to SDI

Write W2 (with bits 11, 12, 13 set to 111) to SDI. This enables read back mode from

SPI.

Write 0001 1111 1111 1111 to SDI (the first three bits mean that W0 is requested to be

read out, the other bits have no sense just to fill the blank bits). This allows to check if

the SDI output is W0 bit3~15.

Write W2 (with bits 11, 12, 13 set to 111) to SDI. This enables read back mode from

SPI.

Write 0101 1111 1111 1111 to SDI (the first three bits mean that W1 is requested to be

read out, the other bits have no sense just to fill the blank bits). This allows to check if

the SDI output is W1 bit3~15.

If the data to be read out are the same as the data write in, it means write function of SPI is

right.

L8229 데이터시트(PDF) 27 Page - STMicroelectronics