4

Raspberry Pi AI Camera – Raspberry Pi Ltd

Physical specification

2.75

23.862

1.12

1

3.875

6.98

5.71

68°

19.61

23.862

14.5

25

2.0

2.0

14.4

12.5

12

12.5

ø4.75

ø2.2

12.8

19.5

ø5.75

43°

2.55

14.5

16.5

Note:

All dimensions in mm

All dimensions are approximate and for

reference purposes only. The dimensions

shown should not be used for producing

production data

The dimensions are subject to part and

manufacturing tolerances

Dimensions may be subject to change

WARNINGS

•

This product should be operated in a well ventilated environment, and if used inside a case, the case should not

be covered.

•

Whilst in use, this product should be firmly secured or should be placed on a stable, flat, non-conductive surface, and

should not be contacted by conductive items.

•

The connection of incompatible devices to Raspberry AI Camera may affect compliance, result in damage to the unit,

and invalidate the warranty.

•

All peripherals used with this product should comply with relevant standards for the country of use and be marked

accordingly to ensure that safety and performance requirements are met.

SAFETY INSTRUCTIONS

To avoid malfunction or damage to this product, please observe the following:

•

Important: Before connecting this device, shut down your Raspberry Pi computer and disconnect it from

external power.

•

If the cable becomes detached, first pull forward the locking mechanism on the connector, then insert the ribbon

cable ensuring that the metal contacts face towards the circuit board, and finally push the locking mechanism

back into place.

•

This device should be operated in a dry environment at normal ambient temperatures.

•

Do not expose to water or moisture, or place on a conductive surface whilst in operation.

•

Do not expose to heat from any source; Raspberry Pi AI Camera is designed for reliable operation at normal ambient

temperatures.

•

Store in a cool, dry location.

•

Avoid rapid changes of temperature, which can cause moisture to build up in the device, affecting image quality.

•

Take care not to fold or strain the ribbon cable.

•

Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors.

•

Whilst it is powered, avoid handling the printed circuit board, or handle it only by the edges, to minimise the risk of

electrostatic discharge damage.