31433 datasheet(10/44 Pages) WIHA

10 / 44 page

Insulated 1/4” Drive Ratchet, EN/IEC 60900 & CSA

Chrome-Vanadium steel. Reversible.

Item

OAL

No.

Inch

lbs.

pkg.

1/4”

140

5.5

.28

1000Volt

Wiha Insulated 1/4” Sockets & Sets

Insulated 1/4” Drive Sockets-6 Point, Insulation According

To ASTM F-1505-01, DIN 7448 & CSA Specification, Up To 1000

Volt. Individually Tested. Chrome-vanadium steel, forged, oil-hardened.

Item

No.

Inch

lbs.

pkg.

3/16

.03

7/32

.03

1/4

.03

9/32

.04

5/16

.04

11/32

.05

3/8

.05

7/16

.06

1/2

.07

9/16

.07

*Sockets must be used with insulated ratchets & extensions

1000Volt

Insulated 1/4” Drive Sockets-6 Point, Insulation According

To ASTM F-1505-01, DIN 7448 & CSA Specification, Up To 1000 Volt.

Individually Tested. Chrome-vanadium steel, forged, oil-hardened.

Item

No.

lbs.

pkg.

5.0

.03

6.0

.03

7.0

.03

8.0

.04

9.0

.04

10.0

.05

11.0

.05

12.0

.06

13.0

.06

14.0

.07

*Sockets must be used with insulated ratchets & extensions

1000Volt

Metric -

6 Point

Inch -

6 Point

Wiha Insulated Hex Bit Sockets

1000Volt

7 Pc. Insulated 3/8” Drive Socket Set - Inch

CV steel, forged, oil-hardened sockets. Insulated to EN/IEC 60900.

Item No.

Set includes the following:

lbs. 1.7

3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2”

Insulated 3/8” Drive Sockets - Insulation according to

EN/IEC 60900, DIN 7448 Specification, Up To 1000 Volt.

Individually Tested. Chrome-vanadium steel, forged, oil-hardened.

Item

OAL

No.

Inch

lbs.

pkg.

3/16

3.1”

.13

7/32

3.1”

.14

1/4

3.1”

.14

5/16

3.1”

.16

3/8

3.1”

.18

7/16

3.1”

.20

1/2

3.1”

.22

*Sockets must be used with insulated ratchets & extensions

1000Volt

WARNING!

Insulated Tools are intended to provide protection against accidental

contact with charged energized circuits. For maximum safety we

recommend de-energizing all circuits whenever possible before starting

work on electrical apparatus or conductors. Always visually inspect

insulation on tools before use, do not use tools if insulation shows signs

of wear or damage to the insulated areas of the tool. Wear appropriate

eye protection when using hand tools. Use NFPA70E certified insulated

protective outer wear when appropriate.

Use & Care Guide For Insulated Tools:

Store tools to minimize risk of damage to insulation, always wear

approved eye protection, Inspect insulation prior to each use of any

insulated tool. Use insulated tools where the ambient temperature

is between -20 to +70O C. Have a qualified safety technician visually

inspect insulation on tools annually for safe use.

318

31805

31807

31809

31811

31813

31815

31817

31890

313

31336

31337

31338

31339

31340

31341

31342

31343

31344

31345

313

31326

31327

31328

31329

31330

31331

31332

31333

31334

31335

12851

SHOP

Toll Free: (800) 494-6104

31433 데이터시트(PDF) 10 Page - Wiha Tools

31433 데이터시트(HTML) 10 Page - Wiha Tools

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44

데이터시트 다운로드

링크 URL