NXP Semiconductors

UM11588

Introduction to FRDM-K22F-AGMP03 sensor toolbox development kit

1 Introduction

2 Finding kit resources and information on the NXP website

NXP Semiconductors provides online resources for this evaluation board and its

supported device(s) on the sensors evaluation boards page.

The information page for the FRDM-K22F-AGMP03 sensor toolbox development kit

is available at www.nxp.com/FRDM-K22F-AGMP03. The information page provides

overview information, documentation, software and tools, ordering information and

a Getting Started tab. The Getting Started tab provides quick-reference information

applicable to using the FRDM-K22F-AGMP03 development kit, including the

downloadable assets referenced in this document.

2.1 Collaborate in the NXP Sensors Community

The NXP Sensors Community is for sharing ideas and tips, asking and answering

technical questions, and receiving input on just about any topics related to NXP sensors.

NXP Sensors Community is at https://community.nxp.com/t5/Sensors/bd-p/sensors

3 Getting started

3.1 Kit contents

The

FRDM-K22F-AGMP03 sensor toolbox development kit include:

• FRDM-STBC-AGMP03: multi-sensor shield board

• FRDM-K22F: MCU board

• USB cable

• Quick Start Guide

3.2 Developer resources

In addition to the kit, the following developer resources are recommended to jump-start

your evaluation or development using FRDM-K22F-AGMP03 board:

• Get Started with IoT Sensing SDK

• Get Started with STB-CE

• Get Started with FreeMASTER-Sensor-Tool

4 Getting to know the hardware

4.1 General description

The FRDM-K22F-AGMP03 is combination of a multi-sensor add-on/companion shield

board (FRDM-STBC-AGMP03) with accelerometer, magnetometer, gyroscope and

pressure-sensing capabilities and a FRDM MCU (FRDM-K22F) board.

The multi-sensor shield board include the following sensor parts:

UM11588

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2021. All rights reserved.

User manual

Rev. 1.0 — 24 March 2021

2 / 9