| 전자부품 데이터시트 검색엔진 |
|
IMX91LP4EVK 데이터시트(PDF) 7 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
IMX91LP4EVK 데이터시트(HTML) 7 Page - NXP Semiconductors |
|
7 / 12 page ![]() 1 Confirmboot switches The boot switches should be set to boot from “eMMC”, SW1301[4-1] (Figure 1) are used for boot, See table below: BOOT Device SW1301[4-1] eMMC/uSDHC1 0000 Note: 1 = ON 0 = OFF 2 ConnectUSB debug cable Connect the UART cable into the port JP1401 (Figure 1). Connect the other end of the cable to a PC acting as a host terminal. UART connections will appear on the PC, The third port will be used as A55 core system debugging. Open the terminal window (i.e., Hyper Terminal or Tera Term), choose the right COM port number and apply the following configuration. • Baud rate: 115200 bps • Data bits: 8 • Parity: None • Stop bits: 1 3 Connectparallel panel display Plug the parallel LCD panel (TM050RDH03-41) into J1001 2x20 PIN EXPI. Change DTB to “imx91-11x11-evk-tianma- wvga-panel.dtb” in u-boot phase. 4Connect mouse Connect the mouse to the USB2 C port connector J302 through USB C OTG cable. Setting up the system The following will describe how to run the pre-loaded Linux image on the IMX91LP4EVK (i.MX 91). 7 Quick Start Guide i.MX 91 EVK |
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |