| 전자부품 데이터시트 검색엔진 |
|
LS1012A 데이터시트(PDF) 28 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
LS1012A 데이터시트(HTML) 28 Page - NXP Semiconductors |
|
28 / 39 page ![]() Figure 2-9. mikroBUS pin specification 2.15 MicroSD card The LS1012A SDHC1 controller is connected to the onboard SDHC connector that can be used to connect the microSD cards. The SD card does not support Write Protect (WP) feature. The onboard power regulator, MC34713EP (U7) provides 3.3 V power supply. The 3.3 V power supply is converted by power switch, FPF1321UCX, to 1.8 V to provide the EVDD power supply to the LS1012A SDHC1 IOs. The following table shows how the power provided to the SDHC devices is controlled. Table 2-11. SDHC memory power control Configuration Signals Value Description SDHC1_VSEL 0 3.3 V (Default) 1 1.8 V (After SDHC_VSEL check) MicroSD card Layerscape LS1012A Freeway (FRWY-LS1012A) Board Reference Manual, Rev. 0, 04/2018 28 NXP Semiconductors |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |