| 전자부품 데이터시트 검색엔진 |
|
MAX14713 데이터시트(PDF) 2 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
MAX14713 데이터시트(HTML) 2 Page - Analog Devices |
|
2 / 10 page ![]() All voltages referenced to GND IN1, IN2 ...................................................................-0.3V to +6V OUT.........................................................................-0.3V to +6V EN1, EN2 ................................................................-0.3V to +6V Current into IN1, IN2 DC Operating (Note 1) ........................................................6A Pulse Rating (10ms)............................................................9A Continuous Power Dissipation (TA = +70ºC) WLP (derate 16.4mW/°C above +70°C)....................1312mW Operating Temperature Range............................-40ºC to +85°C Junction Temperature......................................................+150°C Storage Temperature Range.............................-65ºC to +150°C Soldering Temperature (reflow).......................................+260°C WLP Junction-to-Ambient Thermal Resistance (θJA) ..........52°C/W (Note 2) Electrical Characteristics (VIN1, VIN2 = 1.6V to 5.5V; TA = -40ºC to +85ºC, unless otherwise noted. Typical values are at VIN1, VIN2 = 4.3V; TA = +25ºC.) (Note 3) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS SUPPLY OPERATION Operating Voltage VIN1 VIN2 1.6 5.5 V Shutdown Current ISHDN EN1 = high and EN2 = high 5.75 µA Quiescent Current IIN1 IIN2 EN1 or EN2 = low, ILOAD = 0mA 2.5 7.5 µA INTERNAL FET RON (IN1 or IN2 to OUT) RON VIN_ = 4.3V, IOUT = 1A, TA = +25ºC 11 15 mΩ Soft-Start Trigger Voltage |VIN - VOUT| 0.95 V Soft-Start Time tSS 1 5 10 ms Soft-Start Output dV/dt Limit ILIM_SS CLOAD = 100µF 15 mV/µs IN1 - IN2 Comparator Rising Threshold VTHR_IN VIN1 = 4.3V, VIN2 = 4.0V, OUT is initially connected to IN1, VIN2 rises until OUT connects to IN2 200 mV IN1 - IN2 Comparator Falling Threshold VVTHF_IN VIN1 = 4.3V, VIN2 = 4.6V, OUT is initially connected to IN2, VIN2 falls until OUT connects to IN1 -200 mV LOGIC INPUT (EN1, EN2) EN1, EN2 Input Logic High VIH 1.4 V EN1, EN2 Input Logic Low VIL 0.4 V EN1, EN2 Input Leakage Current ILEAK VEN_ = 0V, 5.5V -1 1 µA MAX14713 Compact 6A Smart Power Path Selector www.maximintegrated.com Maxim Integrated │ 2 Note 2: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer board. For detailed information on package thermal considerations, refer to www.maximintegrated.com/thermal-tutorial. Note 1: DC current is limited by thermal design of the system. Absolute Maximum Ratings Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Package Thermal Characteristics |
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |