| 전자부품 데이터시트 검색엔진 |
|
RK73ZW2HTTP 데이터시트(PDF) 2 Page - KOA Speer Electronics, Inc. |
|
|
|||||||||||||||||||||||||||||
RK73ZW2HTTP 데이터시트(HTML) 2 Page - KOA Speer Electronics, Inc. |
|
2 / 2 page ![]() Taping TX : 4mm width-1mm pitch plastic embossed TBL・TCM : 2mm pitch press paper TPL・TP : 2mm pitch punch paper TD : 4mm pitch punch paper TE : 4mm pitch plastic embossed BK : Bulk Product Code Current Rating 1F:0.5A 1H:0.5A 1E:1A 1J:1A 2A:2A 2B:2A 2E:2A W2H:2A W3A:2A Characteristic Nil : Standard A : Heat shock resistance※2 Terminal Surface Material T:Sn G:Au※3 (L:Sn/Pb※4) JUMPER RK73Z Flat Chip Jumper Resistors ■Construction Coating color:Green (1H, 1E) Black (1F, 1J, 2A, 2B, 2E, W2H, W3A) ■Features ・Wide lineup from 01005 to 2512 size. ・Excellent heat resistance and weather resistance, because of the use of glaze thick film as resistive film. ・Suitable for both flow and reflow solderings. ・Products with lead free termination meet EU-RoHS requirements. EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass. ・AEC-Q200 Tested (Exemption 1F). ■Reference Standards IEC 60115-8 JIS C 5201-8 EIAJ RC-2134C ① Protective coating ② Resistive film ③ Inner electrode ④ Ni plating ⑤ Solder plating ⑥ Ceramic substrate L c c W t d ③ ② ① ④ ⑤ ⑥ EU RoHS ※2 With type A(1E,1J,2A,2B)only T is available as the terminal surface material. No resistance marking. ※3 Products with gold plated electrodes are also available with 1E, 1J and 2A types, so please consult with us. ※4 With type 1F and 1H, W2H, W3A only T is available as the terminal surface material. The terminal surface material lead free is standard. Contact us when you have control request for environmental hazardous material other than the substance specified by EU-RoHS. For further information on taping, please refer to APPENDIX C on the back pages. ■Type Designation Example RK73Z 2B T TD ■Dimensions ※1 RK73Z 2H and RK73Z 3A are also still available (different“d”dimensions=0.4 mm) +0.2 −0.1 ■Ratings Type Rated Ambient Temp. Rated Terminal Part Temp. Resistance Current Rating Max. Overload Current Operating Temp. Range Packaging & Q’ty /Reel(pcs) TX TBL TCM※6 TPL・TP TD TE 1F 70℃ ̶ 50mΩ max. 0.5A 1A −55℃∼+125℃ 40,000 20,000 ̶ ̶ ̶ ̶ 1H 125℃ −55℃∼+155℃ ̶ ̶ 15,000 ̶ ̶ ̶ 1E 70℃ 125℃ 50mΩ max. 1A 2A ̶ ̶ ̶ TPL:20,000 TP :10,000 ̶ ̶ 1J ̶ ̶ ̶ TP :10,000※5 5,000 ̶ 2A 70℃ 125℃ 50mΩ max. 2A 5A ̶ ̶ ̶ TP :10,000※5 5,000 4,000※5 2B 10A ̶ ̶ ̶ ̶ 5,000 4,000※5 2E ̶ ̶ ̶ ̶ 5,000 4,000※5 W2H ̶ ̶ ̶ ̶ ̶ 4,000 W3A ̶ ̶ ̶ ̶ ̶ 4,000 ※5 Standard packaging:TD(4mm pitch punch paper) ※6 Standard taping specification of 1H is TCM. Previously available“TC(10,000pcs/Reel)”is not recommended for new designs. If any questions arise whether to use the“Rated Ambient Temperature”or the“Rated Terminal Part Temperature”in your usage conditions, please give priority to the“Rated Terminal Part Temperature”. For more details, please refer tovIntroduction of the derating curves based on the terminal part temperature”on the beginning of our catalog. Type (Inch Size Code) Dimensions(mm) Weight(g) (1000pcs) L W c d t 1F(01005) 0.4±0.02 0.2±0.02 0.10±0.03 0.11±0.03 0.13±0.02 0.04 1H(0201) 0.6±0.03 0.3±0.03 0.1±0.05 0.15±0.05 0.23±0.03 0.14 1E(0402) 1.0+0.1 −0.05 0.5±0.05 0.2±0.1 0.25+0.05 −0.1 0.35±0.05 0.68 1E AT(0402) 0.25±0.10 0.3±0.15 1J(0603) 1.6±0.2 0.8±0.1 0.3±0.1 0.3±0.1 0.45±0.1 2.14 1J AT(0603) 0.35±0.15 0.5±0.2 2A(0805) 2.0±0.2 1.25±0.1 0.4±0.2 0.3+0.2 −0.1 0.5±0.1 4.54 2A AT(0805) 0.45±0.25 0.6±0.2 0.55±0.10 2B(1206) 3.2±0.2 1.6±0.2 0.5±0.3 0.4+0.2 −0.1 0.6±0.1 9.14 2B AT(1206) 0.55±0.35 0.8±0.2 2E(1210) 2.6±0.2 0.5±0.3 0.4+0.2 −0.1 15.5 W2H※1(2010) 5.0±0.2 2.5±0.2 0.65±0.15 24.3 W3A※1(2512) 6.3±0.2 3.1±0.2 37.1 ■Derating Curve For resistors operated at an ambient temperature of 70℃ or higher, the current shall be derated in accordance with the above derating curve. When the terminal part temperature of the resistor exceeds the rated terminal part temperature shown above, the power shall be derated according to the derating curve. ※Please refer to“Introduction of the derating curves based on the terminal part temperature”on the beginning of our catalog before use. あ1 あ1 100 80 60 40 20 0 -60 -60 -40 -20 0204060 70 125 155 -55 80 100 120 140 160 Ambient temperature(℃) 1H,1E,1J,2A,2B 2E, W2H, W3A 1F あ1 あ1 100 80 60 40 20 0 -60 -60 -40 -20 0204060 125 155 -55 80 100 120 140 160 Terminal part temperature(℃) 1H,1E,1J, 2A, 2B, 2E, W2H, W3A ■Performance ■Precautions for Use ・The substrate of chip resistors is alumina. Cracks may occur at the connection of solder (solder fillet portion) due to the difference of the coefficient of thermal expansion from a mounting board when heat stress like heat cycle, etc. are repeatedly given to them. Care should be taken to the occurrence of the cracks when the change in ambient temperature or ON/OFF of load is repeated, especially when large types of W2H/W3A which have large thermal expansion and also self heating. By general temperature cycle test using glass-epoxy (FR-4) boards under the maximum/minimum temperatures of operating temperature range, the crack does not occur easily in the types of 1F∼2E, but the crack tends to occur in the types of W2H/W3A. The occurrence of the crack by heat stress may be influenced by the size of a pad, solder volume, heat radiation of mounting board etc., so please pay careful attention to designing when a big change in ambient temperature and conditions for use like ON/OFF of load can be assumed. Test Items Performance Requirements Test Methods Limit Typical Resistance 50mΩ Max. after the test 15mΩ Max. after the test 25℃ Overload(Short time) 50mΩ Max. after the test 18mΩ Max. after the test Max. overload current, 5s, 1 cycle Resistance to soldering heat 50mΩ Max. after the test 15mΩ Max. after the test 260℃±5℃, 10s±1s Rapid change of temperature 50mΩ Max. after the test 15mΩ Max. after the test Characteristic「Nil」 (Standard):ー55℃(30min.)/+125℃(30min.)100 cycles Characteristic「A」 (Heat shock resistance):ー55℃(30min.)/+125℃(30min.)1000 cycles Moisture resistance 100mΩ Max. after the test 18mΩ Max. after the test 40℃±2℃, 90%∼95%RH, 1000h 1.5h ON/0.5h OFF cycle Endurance at 70℃ or rated terminal part temperature 100mΩ Max. after the test 18mΩ Max. after the test 70℃±2℃ or rated terminal part temperature ±2℃ 1000h 1.5h ON/0.5h OFF cycle High temperature exposure 100mΩ Max. after the test 15mΩ Max. after the test +125℃, 1000h:1F +155℃, 1000h:1H, 1E, 1J, 2A, 2B, 2E, W2H, W3A Ambient temperature Terminal part temperature ■One-Pulse Limiting Electric Power Pulse Duration(ms) 0.001 0.01 0.1 1 10 100 1000 RK73Z 1H-2A RK73Z 2B-W3A 100 10 1 0.1 0.01 Pulse Duration(ms) 0.001 0.01 0.1 1 10 100 1000 1000 100 10 1 2A 1J 1E 1H W3A W2H 2E 2B Please ask us about the resistance characteristic of continuous applied pulse. Please calculate One-Pulse Limiting Electric Power using upper limit of resistance (50mΩ or 100mΩ) for applied current. The pulse endurance values are not assured values,so be sure to check the products on actual equipment when you use them. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment. Malfunction or failure of the products in such applications may cause loss of human life or serious damage. www.koaglobal.com Oct. 2024 |
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |