| 전자부품 데이터시트 검색엔진 |
|
HCSD-05-D-08.00-01-RW-R 데이터시트(PDF) 2 Page - Samtec, Inc |
|
|
|||||||||||||||||||||||||||||
HCSD-05-D-08.00-01-RW-R 데이터시트(HTML) 2 Page - Samtec, Inc |
|
2 / 2 page ![]() HCMD, HCMS, HCSD, HCSS SERIES HCSD–10–S–03.00–01–T–G HCSS–15–S–03.00–01–G WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. 6 Same as –S “XX” except outer strip connected to conductor #2 and inside strip connected to conductor #1. 4 #1 wire opposite position #1 5 Breakout starts with Number 1 lead indicated by brown wire or red stripe. Shown on top side. “XX” (127.00) 5.00 max. (50.80) 2.00 min. 6 When mating double row connector with two single row connectors, the outer most single will be connected to Conductor #1 and the inside single to Conductor #2. (50.80) 2.00 min. (101.60) 4.00 minimum Outer Most (End of Assembly) “XX” ± 1/ 8" (3.18) Single Row Connectors Double Row Strips (50.80) 2.00 min. (101.60) 4.00 minimum Outer Most (End of Assembly) “XX” ± 1/ 8" (3.18) 6 OTHER OPTIONS NOTCH POLARIZATION 2 Standard cable is color coded. Specify –G for Gray cable with one red edge. 1 Specify “XX” as position. For Double the same position will be polarized on both ends. (Not available on HCM, unless Transfer, then only the socket is polarized) 01 03 02 04 01 03 Single Double 02 04 Specify Suffix from table. All dimensions are ± 1/16" (1,59 mm). Not available in 28 positions and higher. 3 Specify “XX” as number of conductors to be broken out. Requires –SXX, –WXX or –DXX 7 Requires –SXX, –WXX or –DXX 7 7 Required for HCSS and HCSD. (Not available on HCMS or HCMD, unless Transfer, then only the socket is polarized.) PLATING OPTION 02 (3.81) .150 (1.27) .050 01 –N = Notch Polarization –R = Reversed –W “XX” = Wiring Reversed Daisy Chain, Single –RW = Reversed Wiring –S “XX” = Daisy Chain Single – D “XX” = Daisy Chain, Double – P “XX” = Position Polarization –S = 10µ" (0.25 µm) Gold on contact area or tail, Tin on balance (Standard on HCSS & HCSD. Leave blank) –T = Tin (Standard on HCMS & HCMD. Leave blank) –G = Gray Cable – ST “X” = Stripped & Tinned – B “XX” = Breakout –M = Middle Reversed –O = Outside Reversed 1/8" (3.18) 1/4" (6.35) 1/2" (12.70) 3/8" (9.53) –ST8 –ST4 –ST2 –ST3 LEAD STYLE –01 = HCSS/HCSD or (3.05 mm) .120" tail for HCMS/HCMD –02 = (5.84 mm) .230" tail HCMS/HCMD only |
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |