ST52T301P datasheet(39/100 Pages) STMICROELECTRONICS

전자부품 데이터시트 검색엔진

ALLDATASHEET.CO.KR

ST52T301P 데이터시트(PDF) 39 Page - STMicroelectronics

부품명	ST52T301P

상세설명	8-Bit OTP/EPROM DuaLogic] MCUs WITH ADC, UART, TIMER, TRIAC & PWM DRIVER

PDF	100 Pages

Scroll/Zoom	100%

제조업체	STMICROELECTRONICS [STMicroelectronics]

홈페이지	http://www.st.com

Logo

39 / 100 page

8.3 OUTPUT HANDSHAKE

Figure 8.7 illustrates the timing associated with the

READY Handshake signal, when the instruction

LDPR 2 reg is performed.

When READY is reset no significantdata are on the

output port pins, because ST52x301 is writing into

the PERIPH_REG_2.

When the data is ready in PERIPH_REG_2,

READY signal is set.

The rising edge of READY signal can be used as a

latching signal.

No peripheral acknowledge is waited for.

If the signal READY is high, it means that the data

out is still not read.In this case, the following LDPR

instruction is stored in a one register peripheral

stack.

If the READY is maintained high, the following

LDPR instructions store the data coming from the

Registers File on the same register stack.

Figure 8.6. One Line Output Handshake

Figure 8.7. One Line Output Handshake Timing

39/99

ST52T301/E301

ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ]
Alldatasheet는? \| 광고문의 \| 운영자에게 연락하기 \| 개인정보취급방침 \| 링크 투 데이터시트 \| 링크교환 \| 제조사별 검색 All Rights Reserved©Alldatasheet.com
Mirror Sites English : Alldatasheet.com \| English : Alldatasheet.net \| Chinese : Alldatasheetcn.com \| German : Alldatasheetde.com \| Japanese : Alldatasheet.jp Russian : Alldatasheetru.com \| Korean : Alldatasheet.co.kr \| Spanish : Alldatasheet.es \| French : Alldatasheet.fr \| Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com \| Polish : Alldatasheet.pl \| Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in \| Mexican : Alldatasheet.com.mx \| British : Alldatasheet.co.uk \| New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com \| icmetro.com

ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ]

Family Site : ic2ic.com | icmetro.com