ST52X430KIT datasheet(28/88 Pages) STMICROELECTRONICS

28 / 88 page

ST52T430/E430

28/88

Routine associated to the interrupt with higher

priority will start.

In order to avoid possible conflicts between

interrupt masking set in the main program, or

inside high level language compiler macros, the

GIP is hung up through the User Global Interrupt

Mask or the Macro Global Interrupt Mask (see

Figure 4.2).

UEGI/UDGI instruction switches on/off the User

Global Interrupt Mask, enabling/disabling the GIR

for the main program.

MEGI/MDGI instructions switch the Macro Global

Interrupt Mask on/off, in order to ensure that the

macro will not be broken.

4.3 Interrupt Sources

ST52x430 manages interrupt signals generated by

the internal peripherals (PWM/Timers, UART and

Analog to Digital Converter) or coming from the

INT/PC0 pin. The External Interrupt can be

programmed to be active on the rising or falling

edge of INT/PC0 signal by setting the PEXTINT bit

of the Configuration Register to 0.

WARNING:

Changing the interrupt priority an

interrupt request is generated.

Each peripheral can be programmed in order to

generate the associated interrupt; further details

are described in the related chapter.

4.4 Interrupt Maskability

The interrupts can be masked by configuring the

REG_CONF 0 by means of LDCR, or LDCE,

instruction. The interrupt is enabled when the bit

associated to the mask interrupt is “1". Viceversa,

when the bit is ”0", the interrupt is masked and is

kept pendent.

For example:

LDRC 10,6 //load the constant 6 in the

RAM Register 10

LDCR 0, 10 // set the CONF_REG 0 with

the value stored in the RAM Register

the result is CONF_REG0 =00000110 enabling the

interrupts deriving from the ADC (INT_ADC) and

from the PWM/TIMER 0 (INT_PWM/TIMER0).

Reset Configuration ‘000000’

Table 4.1 Configuration Register 0

Description

Bit

Name

Value

Description

0MSKE

External Interrupt

Masked

External Interrupt

Not Masked

MSKAD

A/D Converter

Interrupt

Masked

A/D Converter

Interrupt

Not Masked

MSKTM0

PWM/TIMER

0Interrupt

Masked

PWM/TIMER 0

Interrupt

Not Masked

MSKTM1

PWM/TIMER 1

Interrupt

Masked

PWM/TIMER 1

Interrupt

Not Masked

MSKTM2

PWM/TIMER 2

Interrupt

Masked

PWM/TIMER 2

Interrupt

Not Masked

5MSCI

SCI Interrupt

Masked

SCI Interrupt Not

Masked

PEXTINT

External Interrupt

Polarity

Active on Rising

External Interrupt

Polarity

Active on Falling

Not used

ST52X430KIT 데이터시트(PDF) 28 Page - STMicroelectronics

ST52X430KIT 데이터시트(HTML) 28 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88

데이터시트 다운로드

링크 URL