TAS5705PAPR datasheet(41/71 Pages) TI

41 / 71 page

x(n)

y(n)

M0012-02

–1

Magnitude

Truncation

–1

Subchannel Preprocessing

TAS5705

www.ti.com ...................................................................................................................................................................................................... SLOS549 – JUNE 2008

The biquads are implemented in a direct form-I architecture. The direct form-I structure provides a separate delay

element and mixer (gain coefficient) for each node in the biquad filter.

The five 26-bit (3.23) coefficients for the biquad are programmable via the I2C interface.

The following steps are invovled in using a loudness biquad with the volume comprensation feature:

1. Program the biquad with a loudness filter.

2. Program 0x26 (1/G) and 0x28 (scale).

3. Enable volume compensation in register 0x0E.

Figure 47. Biquad Filter

A subchannel has three input multiplexers that can select from the bass management output, the downmix

output, or the channel-6 input multiplexer output.

Table 4. Submultiplexer Selection

Bits

Submultiplexer

Pass through channel-6 input multiplexer output

Select bass management block output for submultiplexer

Select downmix ouput for submultiplexer

Submit Documentation Feedback

Product Folder Link(s): TAS5705

TAS5705PAPR 데이터시트(PDF) 41 Page - Texas Instruments

TAS5705PAPR 데이터시트(HTML) 41 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71

데이터시트 다운로드

링크 URL