AT89C51SND1C-ROTIL datasheet(81/210 Pages) ATMEL

81 / 210 page

AT8xC51SND1C

4109E–8051–06/03

Description

The USB device controller provides the hardware that the AT8xC51SND1C needs to

interface a USB link to a data flow stored in a double port memory.

It requires a 48 MHz reference clock provided by the clock controller as detailed in Sec-

tion "Clock Controller", page 81. This clock is used to generate a 12 MHz Full Speed bit

clock from the received USB differential data flow and to transmit data according to full

speed USB device tolerance. Clock recovery is done by a Digital Phase Locked Loop

(DPLL) block.

The Serial Interface Engine (SIE) block performs NRZI encoding and decoding, bit stuff-

ing, CRC generation and checking, and the serial-parallel data conversion.

The Universal Function Interface (UFI) controls the interface between the data flow and

the Dual Port RAM, but also the interface with the C51 core itself.

Figure 55. USB Device Controller Block Diagram

Clock Controller

The USB controller clock is generated by division of the PLL clock. The division factor is

given by USBCD1:0 bits in USBCLK register (see Table 104). Figure 56 shows the USB

controller clock generator and its calculation formula. The USB controller clock fre-

quency must always be 48 MHz.

Figure 56. USB Clock Generator and Symbol

USB

CLOCK

48 MHz

12 MHz

D+

D-

DPLL

SIE

UFI

USB

Buffer

To/From

C51 Core

USBCD1:0

USBCLK

48 MHz USB Clock

USBclk

PLLclk

USBCD

--------------------------------

USB

CLOCK

USB Clock Symbol

PLL

CLOCK

AT89C51SND1C-ROTIL 데이터시트(PDF) 81 Page - ATMEL Corporation

AT89C51SND1C-ROTIL 데이터시트(HTML) 81 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL