IMX27L datasheet(9/122 Pages) FREESCALE

9 / 122 page

Functional Description and Application Information

i.MX27/i.MX27L Data Sheet, Advance Information, Rev. 1

Freescale Semiconductor

Preliminary—Subject to Change Without Notice

2.3

Module Descriptions

This section provides a brief text description of all the modules included in the i.MX27/MX27L devices,

arranged in alphabetical order.

2.3.1

1-Wire Module

The 1-Wire module provides bi-directional communication between the ARM926 core and the Add-Only

Memory EPROM, DS2502. The 1-Kbit EPROM holds information about the battery and communicates

with the ARM926 Platform using the IP interface. Through the 1-Wire interface, the ARM926 acts as the

bus master while the DS2502 device is the slave. The 1-Wire peripheral does not trigger interrupts; hence

it is necessary for the ARM926 to poll the 1-Wire to manage the module. The 1-Wire uses an external pin

to connect to the DS2502. Timing requirements are met in hardware with the help of a 1 MHz clock. The

clock divider generates a 1 MHz clock that is used as a time reference by the state machine. Timing

requirements are crucial for proper operation, and the 1-Wire state machine and the internal clock provide

the necessary signal. The clock must be configured to approximately 1 MHz. You can then set the 1-Wire

2.3.2

AHB-Lite IP Interface Module (AIPI)

The AIPI acts as an interface between the ARM Advanced High-performance Bus Lite. (AHB-Lite) and

lower bandwidth peripherals conforming to the IP bus specification Rev 2.0. There are two AIPI modules

in i.MX27/MX27L processors.

The following list summarizes the key features of the AIPI:

•

All peripheral read transactions require a minimum of two system clocks (R-AHB side) and all

write transactions require a minimum of three system clocks (R-AHB side).

•

The AIPI supports 8-bit, 16-bit, and 32-bit IP bus peripherals. Byte, half word, and full word reads

and writes are supported.

•

The AIPI supports multi-cycle accesses by providing 16-bit to 8-bit peripherals operations and

32-bit to both 16-bit and 8-bit peripherals operations.

•

The AIPI supports 31 external IP bus peripherals each with a 4-Kbyte memory map (a slot).

WDOG

Watchdog

Timer Module

Timer

Peripheral

The WDOG module protects against system failures by

providing a method for the system to recover from unexpected

events or programming errors.

2.3.37/26

WEIM

Wireless

External

Interface

Module

External

Memory

Interface

The Wireless External Module (WEIM) handles the interface to

devices external to chip, including generation of chip selects,

clock and control for external peripherals and memory. It

provides asynchronous and synchronous access to devices

with SRAM-like interface.

2.3.38/26

Table 2. Digital and Analog Modules (continued)

Block Mnemonic

Block Name

Functional

Grouping

Brief Description

Section/

Page

IMX27L 데이터시트(PDF) 9 Page - Freescale Semiconductor, Inc

IMX27L 데이터시트(HTML) 9 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL