XC2000 datasheet(95/729 Pages) INFINEON

95 / 729 page

XC2000 Derivatives

Peripheral Units (Vol. 2 of 2)

Analog to Digital Converter

Preliminary

User’s Manual

16-1

V1.0, 2007-06

ADC, UM_V0.1D6

Analog to Digital Converter

The Analog to Digital Converter module (ADC) of the XC2000 allows the conversion of

analog input values into discrete digital values based on the successive approximation

method. With this method, the conversion result is elaborated bit by bit, starting with the

most significant bit. As a consequence, an analog to digital conversion requires a certain

number of clock cycles.

This chapter is structured as follows:

•

Introduction (see Section 16.1)

•

Operating the ADC (see Section 16.2)

•

Module implementation in XC2000 (see Section 16.3)

16.1

Introduction

This section gives an overview about the feature set of the ADC module and introduces

the general structure. It describes the:

•

ADC block diagram with two kernels (see Section 16.1.1)

•

Feature set description (see Section 16.1.2)

•

Abbreviations (see Section 16.1.3)

•

Kernel overview (see Section 16.1.4)

•

Conversion request handling (see Section 16.1.5)

•

Conversion result handling (see Section 16.1.6)

•

Interrupt structure (see Section 16.1.7)

•

Electrical models (see Section 16.1.8)

•

Transfer characteristics and error definitions (see Section 16.1.9)

XC2000 데이터시트(PDF) 95 Page - Infineon Technologies AG

XC2000 데이터시트(HTML) 95 Page - Infineon Technologies AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL