JS48F4400PCZ00 datasheet(79/102 Pages) NUMONYX

79 / 102 page

November 2007

Datasheet

Order Number: 290701-18

Numonyx™ Wireless Flash Memory (W18)

14.1

Read Mode (RCR[15])

All partitions support two high-performance read configurations: synchronous burst

mode and asynchronous page mode (default). RCR[15] sets the read configuration to

one of these modes.

Status register, query, and identifier modes support only asynchronous and single-

synchronous read operations.

14.2

First Access Latency Count (RCR[13:11])

The First Access Latency Count (RCR[13:11]) configuration tells the device how many

clocks must elapse from ADV# de-assertion (VIH) before the first data word should be

driven onto its data pins. The input clock frequency determines this value. See

Table 31, “Read Configuration Register Descriptions” on page 78 for latency values.

Figure 36 shows data output latency from ADV# assertion for different latencies. Refer

to Section , “” on page 80 for Latency Code Settings.

Note:

Other First Access Latency Configuration settings are reserved.

)

Burst Wrap

0 = Wrap bursts within burst length set by CR[2:0]

1 = Don’t wrap accesses within burst length set by CR[2:0].(Default)

2-0

BL[2:0]

Burst Length

001 = 4-Word Burst

010 = 8-Word Burst

011 = 16-Word Burst

111 = Continuous Burst (Default)

Notes:

Undocumented combinations of bits are reserved by Numonyx for future implementations.

Synchronous and page read mode configurations affect reads from main blocks and parameter blocks. Status Register

and configuration reads support single read cycles. RCR[15]=1 disables configuration set by RCR[14:0].

Data is not ready when WAIT is asserted.

Set the synchronous burst length. In asynchronous page mode, the page size equals four words.

Set all reserved Read Configuration Register bits to zero.

Setting the Read Configuration Register for synchronous burst-mode with a latency count of 2 (RCR[13:11] = 010),

data hold for 2 clocks (RCR[9] = 1), and WAIT asserted one data cycle before delay (RCR[8] =1) is not supported.

Table 31: Read Configuration Register Descriptions (Sheet 2 of 2)

Bit

Name

Description1

Notes

Figure 36: First Access Latency Configuration

Code 5

Code 4

Code 3

Code 2

Valid

Address

Valid

Output

Valid

Output

Valid

Output

Valid

Output

Valid

Output

Valid

Output

Valid

Output

Valid

Output

Valid

Output

Valid

Output

Valid

Output

Valid

Output

Valid

Output

Valid

Output

Valid

Output

Valid

Output

Valid

Output

Valid

Output

Address [A]

ADV# [V]

CLK [C]

D[15:0] [Q]

JS48F4400PCZ00 데이터시트(PDF) 79 Page - Numonyx B.V

JS48F4400PCZ00 데이터시트(HTML) 79 Page - Numonyx B.V

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL