Published Date : FEB 28,2008

Drawing No : SDSA6434

V1

Checked : B.L.LIU

P.4/5

Part Number:

ZMDKBBA98W

3.2x2.7mm SURFACE MOUNT LED LAMP

www.SunLED.com

Recommended Soldering Pattern

(Units : mm; Tolerance: ± 0.1)

Tape Specification (Units : mm)

Remarks:

If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ Luminous Flux or wavelength),

the typical accuracy of the sorting process is as follows:

1. Wavelength: +/-1nm

2. Luminous Intensity/ Luminous Flux: +/-15%

3. Forward Voltage: +/-0.1V

Note: Accuracy may depend on the sorting parameters.

The device has a single mounting surface. The device

must be mounted according to the specifications.