| 전자부품 데이터시트 검색엔진 |
|
STV82X7 데이터시트(PDF) 40 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STV82X7 데이터시트(HTML) 40 Page - STMicroelectronics |
|
40 / 156 page ![]() Dedicated Digital Signal Processor (DSP) STV82x7 40/156 The beeper tone level and frequency are programmed in register BEEPER_FREQ_VOL. The level (or volume) ranges between 0 dB and -93 dB in steps of 3 dB and the tone frequency ranges between 62.5 Hz and 8 kHz in steps of 1 octave. A beep generator is shared only by the Loudspeakers or Headphone outputs. Therefore, in the event of simultaneous beeps when in Pulse mode, only the first beep will define the effective duration that will be the same for both outputs. 4.16 Internal Audio/Video Delay (Lip Sync) Since increasing processing on the video signal implies more delay compared to the audio signal, there is a possibility inside the device of compensating by inserting a delay on the audio path in order to resynchronize the two signals: ● 60ms with 48 KHz sampling frequency (SCART only input mode) ● 90ms with 32 KHz sampling frequency (demodulator input mode) The same delay is available for the LS path and/or the HP path. Figure 22: Pulse Mode Figure 23: Continuous Mode 62.5 Hz < f < 8 kHz BEEP_ON = 1 BEEP_ON = 0 T predefined 0.1, 0.25, 0.5 and 1.0 s 62.5 Hz < F < 8 kHz BEEP_ON = 1 BEEP_ON = 0 T defined by I²C write |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |