Published Date : FEB 23, 2008

Drawing No : SDSA6303

V1

Checked : B.L.LIU

P.3/4

Part Number:

ZVG69W

1.0x0.5mm SMD CHIP LED LAMP

www.SunLED.com

Recommended Soldering Pattern

(Units : mm; Tolerance: ± 0.1)

Tape Specification (Units : mm)

The device has a single mounting surface. The device

Remarks:

If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength),

the typical accuracy of the sorting process is as follows:

1. Wavelength: +/-1nm

2. Luminous intensity / luminous flux: +/-15%

3. Forward Voltage: +/-0.1V

Note: Accuracy may depend on the sorting parameters.