| 전자부품 데이터시트 검색엔진 |
|
M32C/8A 데이터시트(PDF) 192 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
M32C/8A 데이터시트(HTML) 192 Page - Renesas Technology Corp |
|
192 / 372 page ![]() M32C/8A Group 15. Timers (Timer B) Rev.1.00 Jul 15, 2007 Page 175 of 352 REJ09B0385-0100 15.2.3 Pulse Period Measurement Mode, Pulse Width Measurement Mode In pulse period measurement mode and pulse width measurement mode, the timer measures pulse period or pulse width of the external signal. Table 15.11 shows specifications in pulse period measurement mode and pulse width measurement mode. Figure 15.29 shows a pulse period measurement operation. Figure 15.30 shows a pulse width measurement operation. Table 15.11 Specifications of Pulse Period Measurement Mode, Pulse Width Measurement Mode NOTES: 1. Bits CNT3 to CNT0 in the TCSPR register select no division (n = 0) or divide-by-2n (n = 1 to 15). 2. An interrupt request is not generated when the first valid edge is input after the count starts. 3. To set the MR3 bit to 0 (no overflow), wait for one or more count source cycles to write to the TBiMR register after the MR3 bit becomes 1, while the TBiS bit is set to 1. 4. A value read from the TBi register is undefined until the second valid edge is detected after the count starts. Item Specification Count source f1, f8, f2n(1), fC32 Count operation • Counter increments The counter value is transferred to the reload register when the valid edge of a pulse is detected. Then the counter becomes 0000h and the count continues. Count start condition The TBiS bit (i = 0 to 5) in the TABSR or TBSR register is set to 1 (count starts) Count stop condition The TBiS bit is set to 0 (count stops) Interrupt request generation timing • When the valid edge of a pulse is input(2) • When the timer overflows(3) The MR3 bit in the TBiMR register is set to 1 (overflow) simultaneously. TBiIN pin function Pulse input Read from timer A read from the TBi register returns the contents of the reload register (measurement results)(4) Write to timer The TBi register cannot be written |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |