H8S2245 datasheet(217/818 Pages) RENESAS

217 / 818 page

Section 6 Bus Controller

Rev.3.00 Mar. 26, 2007 Page 175 of 772

REJ09B0355-0300

6.8.5

Usage Note

When MSTPCR has been set to H'FFFF or H'EFFF and a transition has been made to sleep mode,

the external bus release function is stopped. If the external bus release function is to be used in

sleep mode, H'FFFF or H'EFFF should not be set in MSTPCR.

6.9

Bus Arbitration

6.9.1

Overview

The H8S/2245 Group has a bus arbiter that arbitrates bus master operations.

There are two bus masters, the CPU and DTC, which perform read/write operations when they

have possession of the bus. Each bus master requests the bus by means of a bus request signal. The

bus arbiter determines priorities at the prescribed timing, and permits use of the bus by means of a

bus request acknowledge signal. The selected bus master then takes possession of the bus and

begins its operation.

6.9.2

Operation

The bus arbiter detects the bus masters' bus request signals, and if the bus is requested, sends a bus

request acknowledge signal to the bus master making the request. If there are bus requests from

more than one bus master, the bus request acknowledge signal is sent to the one with the highest

priority. When a bus master receives the bus request acknowledge signal, it takes possession of the

bus until that signal is canceled.

The order of priority of the bus masters is as follows:

(High)

DTC

CPU

(Low)

An internal bus access by an internal bus master, and external bus release, can be executed in

parallel.

In the event of simultaneous external bus release request, and internal bus master external access

request generation, the order of priority is as follows:

(High) External bus release > Internal bus master external access (Low)

H8S2245 데이터시트(PDF) 217 Page - Renesas Technology Corp