M32CSLASH86 datasheet(271/505 Pages) RENESAS

271 / 505 page

Page 248

18. A/D Converter

)

(

18.1.6 Multi-Port Single Sweep Mode

In multi-port single sweep mode, analog voltage applied to 16 selected pins is converted one-by-one to a

digital code. Set the DUS bit in the AD0CON3 register to "1" (DMAC operating mode enabled). Table

18.7 lists specifications of multi-port single sweep mode.

Table 18.7 Multi-Port Single Sweep Mode Specifications

Item

Specification

Function

The MPS11 and MPS10 bits in the AD0CON4 register select 16 pins. Analog

voltage applied to 16 pins is converted one-by-one to a digital code in the following

order: AN0 to AN7

ANi0 to ANi7 (i=0, 2, 15)

e.g., When the MPS11 and MPS10 bits are set to "102" (AN0 to AN7, AN00 to

AN07), analog voltage is converted to a digital code in the following order:

AN0

AN1

AN2

AN3

AN4

AN5

AN6

AN7

AN00

AN01

.......

AN06

AN07

Start Condition

Same as one-shot mode

Stop Condition

The ADST bit in the AD0CON0 register is set to "0" (A/D conversion stopped) by

program

Interrupt Request Generation Timing An interrupt request is generated every time A/D conversion is completed

(Set the DUS bit to "1")

Analog Voltage Input Pins

Select from AN0 to AN7

AN150 to AN157, AN0 to AN7

AN00 to AN07 or AN0 to

AN7

AN20 to AN27

Reading of A/D Conversion Result Do not read the AD00 register. A/D conversion result is stored in the AD00 regis-

ter after the A/D conversion is completed. DMAC transfers the conversion result

to any memory space. Refer to 13. DMAC for DMAC settings

(Set the DUS bit to "1")

M32C/86 데이터시트(PDF) 271 Page - Renesas Technology Corp

M32C/86 데이터시트(HTML) 271 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL