 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
M16C/62 데이터시트(PDF) 488 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
M16C/62 데이터시트(HTML) 488 Page - Renesas Technology Corp |
|
|
488 / 615 page  Multiple Interrupts Mitsubishi microcomputers M16C / 62A Group SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER 2-171 2.14.2 Multiple Interrupts Operation The state when control branched to an interrupt routine is described below: · The interrupt enable flag (I flag) is set to “0” (the interrupt is disabled). · The interrupt request bit of the accepted interrupt is set to “0”. · The processor interrupt priority level (IPL) is assigned to the same interrupt priority level as as signed to the accepted interrupt. Setting the interrupt enable flag (I flag) to “1” within an interrupt routine allows an interrupt request as- signed a priority higher than the IPL to be accepted. An interrupt request that is not accepted because of low priority will be held. If the condition following is met when the REIT instruction returns the IPL and the interrupt priority is determined, then the interrupt request being held is accepted. Interrupt priority level of the interrupt request being held > Returned the IPL Figure 2.14.6 shows the example of the multiple interrupts operation. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
