| 전자부품 데이터시트 검색엔진 |
|
M38K09RFS 데이터시트(PDF) 87 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
M38K09RFS 데이터시트(HTML) 87 Page - Renesas Technology Corp |
|
87 / 328 page ![]() FUNCTIONAL DESCRIPTION Rev.2.00 Oct 05, 2006 page 70 of 112 38K0 Group REJ09B0337-0200 HARDWARE #0 #1 #2 Mch_req #0 #1 #2 012 3 4 5 req req req 010016 010116 010216 010316 ack ack ack DMA acknowledge ExDACK mRD detection mRD detection DMA request ExDREQ ➀ ➀ ➁➂’ ➂’ ➂ ➂ ➃➄ ➁➃ ➄ ➅ ➅ Address ExA0 Chip select ExCS Read ExRD Write ExWR Data DQ0 to DQ7 Internal clock φ Transmit buffer TXBUF Operation enabled Transmission completed Main sequencer Internal memory access Acknowledgment of internal memory access Memory address Counter end Burst end Memory channel operation end interrupt <Initial setting> External I/O configuration register Set as necessary. Memory channel operation mode register MC_DIR[1:0] (Memory channel direction control) = 102 (Transmit mode) Burst (burst) = “1” (Burst mode) Memory address counter (Example) 010016 End address register (Example) 010216 <Operation start command> EXB interrupt source enable register MC_ENB (Memory channel operation enable) = “1” (Operation start) ➀ In the memory channel transmit mode when the command for enabling operation is written, an internal memory access sequence which synchronized with a rise of φ is activated. ➁ A data is read out from the internal memory within two clocks at a minimum and this data is stored in the transmit buffer (TXBUF). The memory address counter is simultaneously increased and assertion of the memory channel request is made. ➂ When a rise of ExRD is detected, an internal memory access sequence which synchronized with a rise of φ is activated. ➃ A data is read out from the internal memory within two clocks at a minimum and this data is stored in the transmit buffer (TXBUF). The memory address counter is simultaneously increased. ➄ When the read operation from the end address has been completed, the detection circuit of external read signal (ExRD) operation is enabled and negation of the memory channel request which synchronized with the following φ is made. ➅ When a rise of ExRD is detected, the memory channel operation sequence ends and the memory channel operation end interrupt is generated. Dack = “0” A0 = “x” CS = “1” Dack = “0” A0 = “x” CS = “1” Dack = “0” A0 = “x” CS = “1” Fig. 98 Memory channel tranmitting operation (2) (7) Memory Channel Transmitting Operation (2)-Burst Mode Memory channel transmitting operation (2) is shown bellow. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |