| 전자부품 데이터시트 검색엔진 |
|
M38K09RFS 데이터시트(PDF) 110 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
M38K09RFS 데이터시트(HTML) 110 Page - Renesas Technology Corp |
|
110 / 328 page ![]() FUNCTIONAL DESCRIPTION Rev.2.00 Oct 05, 2006 page 93 of 112 38K0 Group REJ09B0337-0200 HARDWARE (2) Parallel I/O Mode Parallel I/O mode is the mode which parallel output and input soft- ware command, address, and data required for the operations (read, program, erase, etc.) to a built-in flash memory. Use the ex- clusive external equipment flash programmer which supports the 38K0 Group (flash memory version). Refer to each programmer maker’s handling manual for the details of the usage. User ROM and Boot ROM Areas In parallel I/O mode, the user ROM and boot ROM areas shown in Fig- ure 116 can be rewritten. Both areas of flash memory can be operated on in the same way. The boot ROM area is 4 Kbytes in size. It is located at addresses F00016 through FFFF16. Make sure program and block erase opera- tions are always performed within this address range. (Access to any location outside this address range is prohibited.) In the Boot ROM area, an erase block operation is applied to only one 4 Kbyte block. The boot ROM area has had a standard serial I/O mode control pro- gram stored in it when shipped from the Mitsubishi factory. There- fore, using the device in standard serial I/O mode, you must perform program and block erase in the user ROM area. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |