M61323SP/FP

REJ03F0201-0201 Rev.2.01 Mar 31, 2008

Page 17 of 19

Note How to Use This IC (M61323SP)

2. H, V input is 5.0 V TTL type.

3. Input signal with sufficient low impedance to input terminal.

4. The terminal of R, G, B output pin are shown as figure 1.

5. Switch (pin 13) can be changed by supplying some voltage as figure 2.

0 to 0.5 V: INPUT1

2.5 to 5 V: INPUT2

0 to 0.5 V: Power save mode (H.V-SW, Sync-Sep., G-Buffer)

2.5 to 5 V: Normal mode

Do not apply 5 V or more DC voltage

7. When not use the Sync-separation circuit built in this IC, capacitance of several tens of pF is required between the

pin 22 and GND.

R

I

< 5 mA

5 V

50

Ω

600

Ω

Figure 1

13

Figure 2

11

Figure 3