| 전자부품 데이터시트 검색엔진 |
|
ATR4258 데이터시트(PDF) 18 Page - ATMEL Corporation |
|
|
|||||||||||||||||||||||||||||
ATR4258 데이터시트(HTML) 18 Page - ATMEL Corporation |
|
18 / 38 page ![]() 18 4838B–AUDR–05/05 ATR4258 4.24 Adjacent Channel Sensor The adjacent channel sensor is active in FM mode only and measures the field strength outside the reception band. Figure 4-6. Adjacent Channel Sensor 4.25 MPINT and ADJAC Reset Bit 6 allows a resets of the multipath sensor and the adjacent channel sensor by connecting pin 10 and pin 40 internally to ground and so the external capacitors can be discharged very quickly. 4.26 Multipath Sensor The multipath sensor is active in FM mode only and measures the disturbance due to multipath reception. The multipath sensor detects drops in the field strength after the integrated band filter by calculating the difference between an averaged maximum field strength and the current field strength. The maximum depth of these drops is represented by the voltage of the peak detector at pin 40 (MULTIP). The level of this voltage represents the degree of disturbance in the received signal. Figure 4-7. Multipath Sensor + Pin 10 (ADJAC) SMeter 30 µA IF Pin 9 (Meter) Table 4-30. Multipath and Adjacent Channel Reset MPINT and Adjacent Channel (Pin 10 and Pin 40) Bit 6 Normal mode 0 Connection to ground 1 4k + Pin 40 |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |