 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
WARP20 데이터시트(PDF) 9 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
WARP20 데이터시트(HTML) 9 Page - STMicroelectronics |
|
|
9 / 28 page  Output Port. This block provides the output data supported by handshaking signals. Ouput data resolution is 8 bit. An output ready on the bus O0-O7 is indicated by a DS pulse and by its identification number (OC0- OC1). WAIT active temporarily stops the elabora- tion phase allowing the synchronization with slower devices. Programmable A/D output pulse. This block al- lows to program the width of the pulse provided on O11 (only in On-Line mode) that can be used as a Start Conversion for an external A/D. The width of this pulse can be configured by means of the related register (see register bench description) following the table 4. Start conversion Pulse Register Pulse Width (TCLK = MCLK Period) Low, Low, Low 128xTCLK Low, Low, High 256xTCLK Low, High, Low 2040xTCLK Low, High, High 4080xTCLK High, Low, Low 8160xTCLK High, Low, High 16320xTCLK High, High, Low 32000xTCLK High, High, High 65520xTCLK Table 4. Start Conversion Pulse (O11) Width Setting. 9/28 W.A.R.P.2.0 |
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
