Rev. 03

Rev. 03

May 2008

May 2008

www.ZLED.com

www.ZLED.com

19

Precaution for use

[1] Acriche series run on high voltage such as 110 V or 220 V.

[2] Please don't touch the PCB surface, which has built-in terminals and chips,

with your hands or metals, while Acriche series is running.

[3] Please don't add or change wires,while Acriche series is running.

Handling of silicone resin for LEDS

[1] Acriche series is encapsulated by silicone resin for the highest flux efficiency.

[2] Notes for handling of Silicone resin Acriche series.

[3] Avoid touching silicone resin parts especially by sharp tools such as

Pincette (Tweezers).

[4] Avoid leaving fingerprints on silicone resin parts.

[5] Dust sensitivity silicone resin need containers having cover for storage.

[6] When populating boards in SMT production, there are basically no restrictions

regarding the form of the pick and place nozzle, except that mechanical

pressure on the surface of the resin must be prevent.

[7] Please do not force over 3000 gf impact or pressure diagonally on the silicon

lens. It will cause fatal damage of this product.

[8] Please do not recommend to cover the silicone resin of the Acriche series with

other resin (epoxy, urethane, etc).