MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.

Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.

MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.

Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.

5

Handling Information

Quality Parameters

Part Marking Guide

Although protection circuitry has been designed into the M320x oscillator, proper precautions should be taken to

avoid exposure to electrostatic discharge (ESD) during handling and mounting. MtronPTI utilizes a human-body

model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation.

ESD voltage thresholds are dependent on the circuit parameters used to define the mode. Although no industry-

wide standard has been adopted for the CDM, a standard HBM (resistance = 1500 Ω, capacitance = 100 pF) is

widely used and therefore can be used for comparison purposes. The HBM ESD threshold presented here was

obtained using these circuit parameters.

M320x Series

9x14 mm, 3.3/2.5/1.8 Volt,

LVPECL/LVDS/CML, VCXO

Line 1: Model Number

Line 2: Frequency

Line 3: Date Code

Line 4: Pin 1 Indicator / MtronPTI