전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

LDPR 데이터시트(PDF) 7 Page - Linear Technology

부품명 LDPR
상세설명  Micropower Buck Regulator with Integrated Boost and Catch Diodes
PDF  20 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  LINER [Linear Technology]
홈페이지  http://www.linear.com
Logo LINER - Linear Technology

LDPR 데이터시트(HTML) 7 Page - Linear Technology

Back Button LDPR Datasheet HTML 3Page - Linear Technology LDPR Datasheet HTML 4Page - Linear Technology LDPR Datasheet HTML 5Page - Linear Technology LDPR Datasheet HTML 6Page - Linear Technology LDPR Datasheet HTML 7Page - Linear Technology LDPR Datasheet HTML 8Page - Linear Technology LDPR Datasheet HTML 9Page - Linear Technology LDPR Datasheet HTML 10Page - Linear Technology LDPR Datasheet HTML 11Page - Linear Technology Next Button
Zoom Inzoom in Zoom Outzoom out
 7 / 20 page
background image
LT3470A
7
3470afa
SHDN (Pin 8): The SHDN pin is used to put the LT3470A in
shutdown mode. Tie to ground to shut down the LT3470A.
Apply 2V or more for normal operation. If the shutdown
feature is not used, tie this pin to the VIN pin.
NC (Pin 7): This pin can be left floating, connected to VIN,
or tied to GND.
VIN (Pin 6): The VIN pin supplies current to the LT3470A’s
internal regulator and to the internal power switch. This
pin must be locally bypassed.
GND (Pin 5): Tie the GND pin to a local ground plane
below the LT3470A and the circuit components. Return
the feedback divider to this pin.
SW (Pin 4): The SW pin is the output of the internal power
switch. Connect this pin to the inductor, catch diode and
boost capacitor.
BOOST (Pin 3): The BOOST pin is used to provide a drive
voltage, which is higher than the input voltage, to the
internal bipolar NPN power switch.
BIAS (Pin 2): The BIAS pin connects to the internal boost
Schottky diode and to the internal regulator. Tie to VOUT
when VOUT>2.5VortoVINotherwise.WhenVBIAS>3Vthe
BIAS pin will supply current to the internal regulator.
FB (Pin 1): The LT3470A regulates its feedback pin to
1.25V. Connect the feedback resistor divider tap to this
pin. Set the output voltage according to VOUT = 1.25V (1
+ R1/R2) or R1 = R2 (VOUT/1.25 – 1).
Exposed Pad (Pin 9):
Ground. Must be soldered to PCB.
PIN FUNCTIONS



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com