GAMEWELL-FCI

12 Clintonville Road, Northford, CT 06472-1653 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118

9020-0617 Rev. E page 2 of 2

www.gamewell-fci.com

Installation

ASD-PL2F plug-in sensors use a separate base to

simplify installation, service, and maintenance. A

special tool allows maintenance personnel to plug-in

and remove sensors without using a ladder.

deep. Suitable mounting base boxes include:

•4.0" (10.2 cm) square box

•3.5" (8.9 cm) or 4.0" (10.2 cm) octagonal box

• Single-gang box (except relay or isolator bases)

• With B501BH or B501BHT base, use a 4.0" (10.2 cm)

square box

• With B224RB or B224BI base, use a 3.5" (8.9 cm)

octagonal box, or a 4.0" (10.2 cm) octagonal or square

box

NOTE: Because of the inherent supervision provided

by the SLC, end-of-line resistors are not required.

Wiring “T-taps” or branches are permitted for Style 4

(Class “B”) wiring.

Sensor Spacing

Gamewell-FCI recommends spacing sensors in com-

pliance with NFPA 72. In low airflow applications with

specific information regarding sensor spacing, place-

ment and special applications, refer to NFPA 72.

Specifications

Size:

2.1” (5.1 cm) high x 4.1” (10.4 cm)

diameter installed in B501 base, 6.1”

(15.5 cm) diameter installed in ADB-FL

base.

Shipping Weight: 5.2 oz. (147 g)

Operating

Temperature:

ASD-PL2F:

32° F to 120° F (0° C to 49° C)

ASD-PTL2F:

32° F to 100° F (0° C to 38° C)

Velocity Range: 0-4000 ft./min. (1,219.2 m/min.),

suitable for installation in ducts.

Relative

Humidity:

10-93% (non-condensing)

Thermal Ratings: Fixed-temperature setpoint

135° F (57° C)

Electrical Specifications

VoltageRange:

15 – 32 volts DC peak

Standby Current: (max. avg.): .0003 A @ 24 VDC

(one communication every 5

seconds with LED enabled)

Maximum Alarm

Current:

.0065 A @ 24 VDC (LED) lit).

Bases and Options

ADB-FL

6.1” (15.5 cm) diameter

B501

4.1” (10.4 cm) diameter

B501BH or

B501BHT

Sounder base assembly (B501BHT

produces a temporal pattern).

Includes B501 base

B224RB

Relay Base

Screw terminals:

Relay type: Form-C

Rating:

2.0A @ 30 VDC resistive;

0.3 A @ 110 VDC inductive;

1.0 A @ 30 VDC inductive.

Dimensions:

6.2” x 1.2” (15.7 x 3.0 cm)

Maximum: 25 devices between

isolator bases.

RA400Z

Remote alarm indicator, LED.

BCK-200

Black detector covers (box of 10)