GAMEWELL-FCI

12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118

CS-2047 Rev. A page 2 of 2

www.gamewell-fci.com

Programming

All other programming is accomplished at the Fire Alarm

Control Panel (FACP), either through a laptop computer or

the control panel operator’s display.

Mounting

The SCE-95 is designed to mount in a standard 4.688"

(11.908 cm) electrical backbox. The SCE-95 should be

mounted in an easily accessible location of proper connec-

tion and activation.

Engineer’s Specifications

A programmable electronic device shall be provided for the

remote control of notification appliances. The device shall

communicate with the main FACP via the SLC circuit. It

shall supervise its notification appliance circuit and include

an LED for circuit activation annunciation. It shall be

Gamewell-FCI SCE-95.

Specifications

P+, P- Power:

20-24 VDC from listed supply.

Standby Current:

0.0005 A.

Alarm Current:

0.0015 A.

Operating

Temperature:

0° C to 49° C (32°F to 120°F).

Relative Humidity:

85% non-condensing.

Housing

Requirements:

4.688"

(11.908 cm) backbox.

Output Rating:

0.2 Amp DC signal circuit.

Auxiliary input Power: 24 VDC signalling power.

Ordering Information

Model

Description

SCE-95

Signal control element device. XP95 protocol

compatible.

70839

Trim ring for flush mounting the SCE-95.

SCD

Optional signal control display; provides

annunciation of the SCE-95 dontrol element

devices at the FACP. One needed for every

eight SCEs. Compatible only with the IF632

and IF650 FACPs.