 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
UM0470 데이터시트(PDF) 13 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
UM0470 데이터시트(HTML) 13 Page - STMicroelectronics |
|
|
13 / 37 page  UM0470 Single wire interface module (SWIM) 13/37 3.8 SWIM communication in Halt mode To maintain the communication link with the debug host, the HSI oscillator remains on when the MCU enters Halt mode. This means that halt mode power consumption measurements have no meaning when the SWIM module is active. The NO_ACCESS bit in the SWIM_CSR register is set when the system is in HALT, WFI or readout protection mode. This means the bus is not accessible in this case. The OSCOFF bit in the SWIM_CSR register is used to switch off the oscillator. In this case, debug control is lost as long as the device is in Halt mode and the SWIM pin is high. The only way to recover the debug control is to induce a falling edge on SWIM pin: this will re- enable the HSI oscillator. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
