LVC08A datasheet(2/8 Pages) TI

2 / 8 page

SN54LVC08A, SN74LVC08A

QUADRUPLE 2-INPUT POSITIVE-AND GATES

SCAS283G – JANUARY 1993 – REVISED JUNE 1998

POST OFFICE BOX 655303

• DALLAS, TEXAS 75265

logic symbol†

† This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.

Pin numbers shown are for the D, DB, J, PW, and W packages.

logic diagram, each gate (positive logic)

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)‡

Supply voltage range, VCC

–0.5 V to 6.5 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input voltage range, VI (see Note 1)

–0.5 V to 6.5 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Output voltage range, VO (see Notes 1 and 2)

–0.5 V to VCC + 0.5 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input clamp current, IIK (VI < 0)

–50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Output clamp current, IOK (VO < 0)

–50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Continuous output current, IO

±50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Continuous current through VCC or GND

±100 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

θJA (see Note 3): D package

127

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DB package

158

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PW package

170

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Storage temperature range, Tstg

–65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

‡ Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.

2. The value of VCC is provided in the recommended operating conditions table.

3. The package thermal impedance is calculated in accordance with JESD 51.

LVC08A 데이터시트(PDF) 2 Page - Texas Instruments

LVC08A 데이터시트(HTML) 2 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8

데이터시트 다운로드

링크 URL