1A

1.5A

3A

2A

6A

5A

4A

4

5

6

2

3

1

0

Derating

Operating Temperature(¢X

C)

125

85

Operating Temperature(°C)

SUPERWORLD ELECTRONICS (S) PTE LTD

NOTE : Specifications subject to change without notice. Please check our website for latest information.

PG. 5

01.04.2008

FERRITE CHIP INDUCTORS

L2 SERIES

Derating Curve

For the ferrite chip bead which withstanding current over 1.5A, as the

operating temperature over 85°C, the derating current information is

necessary to consider with. For the detail derating of current, please

refer to the Derated Current vs. Operating Temperature curve.

not be allowed.

Appearance : Cracking, shipping & any other

defects harmful to the characteristics should

The ferrite should not be damaged by forces

applied on the right condition.

Random Vibration Test

Bending Strength

ITEM

1.0(0.039)

R0.5(0.02)

directions (Total 6 hours).

Amplitude : 1.52mm

Frequency : 10-55-10Hz for 1 min.

Directions & times : X, Y, Z directions for 2 hours.

A period of 2 hours in each of 3 mutually perpendicular

A

PERFORMANCE

TEST CONDITION

Chip

height of 75cm.

Drop 10 times on a concrete floor from a

Drop

No mechanical damage

Appearance : No damage.

Inductance : Within ±10% of initial value.

Temperature

Loading at High

Humidity : 90~95% RH.

Temperature : 40±2°C

Duration : 1008±12hrs

Duration : 1008±12hrs

Applied Current : rated current

Temperature : 85±5°C

Measured at room temperature after placing for 2 to 3hrs.

Measured at room temperature after placing for 2 to 3hrs.

Humidity

Measured : 100 times

Appearance : No damage.

Phase

Inductance : Within ±10% of initial value.

Low temperature storage test

Thermal Shock

Number of cycles : 100

Step2 : +85±5°C 30±3 min.

Duration : 1008±12hrs

Temperature : -55±2°C

Measured at room temperature after placing for 2 to 3hrs.

Measured at room temperature after placing for 2 to 3hrs.

+85±5°C

-40±2°C

2

1

30±3

30±3

For L Series :

Step1 : -40±2°C 30±3 min.

Condition for 1 cycle

Temperature (°C)

Times (min.)

height of 75cm.

Drop 10 times on a concrete floor from a

Drop

No mechanical damage

8. RELIABILITY & TEST CONDITION :

Q : Within ±30% of initial value.

Q : Within ±30% of initial value.

2.5

2.70 (0.106)

7

8

0.80 (0.033)

mm (inches)

1.40 (0.055)

2.00 (0.079)

3

4

5

6

Series name

2

1.0

2.5

0.3

P-Kgf

For Z / L Series :