| 전자부품 데이터시트 검색엔진 |
|
TLC320AC02IPM 데이터시트(PDF) 43 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
TLC320AC02IPM 데이터시트(HTML) 43 Page - Texas Instruments |
|
43 / 84 page ![]() 3–4 3.5.5 DAC Channel Signal-to-Distortion Ratio, VDD = 5 V, fs = 8 kHz (Unless Otherwise Noted) PARAMETER TEST CONDITIONS AV = 0 dB AV = – 6 dB AV = – 12 dB UNIT PARAMETER TEST CONDITIONS MIN MAX MIN MAX MIN MAX UNIT VO = – 6 dB to 0 dB 64 — — VO = – 12 dB to – 6 dB 59 64 — C VO = – 18 dB to – 12 dB 56 59 64 DAC channel signal-to- distortion ratio VO = – 24 dB to – 18 dB 50 56 59 dB distortion ratio (see Note 8) VO = – 30 dB to – 24 dB 44 50 56 dB (see Note 8) VO = – 36 dB to – 30 dB 38 44 50 VO = – 42 dB to – 36 dB 32 38 44 VO = – 48 dB to – 42 dB 26 32 38 NOTE 8: The input signal, VI, is the digital equivalent of a 1020-Hz sine wave (full-scale analog output at full-scale digital input = 0 dB). The nominal differential DAC channel output with this input condition is 6 V peak to peak. The load impedance for the DAC output buffer is 600 Ω from OUT+ to OUT–. 3.5.6 System Distortion, VDD = 5 V, fs = 8 kHz, FCLK = 144 kHz (Unless Otherwise Noted) PARAMETER TEST CONDITIONS MIN TYP† MAX UNIT Single ended input (see Note 9) 82 Second harmonic Single-ended input (see Note 9) 82 ADC channel Second harmonic Differential input (see Note 9) 64 82 attenuation Third harmonic and Single-ended input (see Note 9) 77 higher harmonics Differential input (see Note 9) 64 77 Single-ended output (buffered DAC VMID) 82 dB Second harmonic (buffered DAC VMID) (see Note 10) 82 dB DAC channel attenuation Differential output (see Note 10) 64 82 attenuation Third harmonic and higher harmonics Single-ended output (see Note 10) 77 higher harmonics Differential output (see Note 10) 64 77 † All typical values are at VDD = 5 V and TA = 25°C. NOTES: 9. The input signal is a 1020-Hz sine wave for the ADC channel. Harmonic distortion is defined for an input level of – 1 dB. 10. The input signal is the digital equivalent of a 1020-Hz sine wave (digital full scale = 0 dB). The nominal differential DAC channel output with this input condition is 6 V peak to peak. The load impedance for the DAC output buffer is 600 Ω from OUT+ to OUT–. Harmonic distortion is specified for a signal input level of 0 dB. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |