| 전자부품 데이터시트 검색엔진 |
|
TDA8920C 데이터시트(PDF) 21 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
TDA8920C 데이터시트(HTML) 21 Page - NXP Semiconductors |
|
21 / 39 page ![]() TDA8920C_2 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 02 — 11 June 2009 21 of 39 NXP Semiconductors TDA8920C 2 × 110 W class-D power amplifier The most effective way to avoid pumping effects is to connect the TDA8920C in a mono full-bridge configuration. In the case of stereo single-ended applications, it is advised to connect the inputs in anti-phase (see Section 8.4 on page 11). The power supply can also be adapted; for example, by increasing the values of the supply line decoupling capacitors. 13.7 Application schematic Notes on the application schematic: • Connect a solid ground plane around the switching amplifier to avoid emissions • Place 100 nF capacitors as close as possible to the TDA8920C power supply pins • Connect the heatsink to the ground plane or to VSSPn using a 100 nF capacitor • Use a thermally conductive, electrically non-conductive, Sil-Pad between the TDA8920C heat spreader and the external heatsink • The heat spreader of the TDA8920C is internally connected to VSSD • Use differential inputs for the most effective system level audio performance with unbalanced signal sources. In case of hum due to floating inputs, connect the shielding or source ground to the amplifier ground. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |