전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

SRT512 데이터시트(PDF) 35 Page - STMicroelectronics

부품명 SRT512
상세설명  13.56 MHz short-range contactless memory chip with 512-bit EEPROM and anticollision functions
PDF  46 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  STMICROELECTRONICS [STMicroelectronics]
홈페이지  http://www.st.com
Logo STMICROELECTRONICS - STMicroelectronics

SRT512 데이터시트(HTML) 35 Page - STMicroelectronics

Back Button SRT512 Datasheet HTML 31Page - STMicroelectronics SRT512 Datasheet HTML 32Page - STMicroelectronics SRT512 Datasheet HTML 33Page - STMicroelectronics SRT512 Datasheet HTML 34Page - STMicroelectronics SRT512 Datasheet HTML 35Page - STMicroelectronics SRT512 Datasheet HTML 36Page - STMicroelectronics SRT512 Datasheet HTML 37Page - STMicroelectronics SRT512 Datasheet HTML 38Page - STMicroelectronics SRT512 Datasheet HTML 39Page - STMicroelectronics Next Button
Zoom Inzoom in Zoom Outzoom out
 35 / 46 page
background image
SRT512
SRT512 commands
Doc ID 13277 Rev 4
35/46
8.8
Write_block (Addr, Data) command
Command code = 09h
On receiving the Write_block command, the SRT512 writes the 4 bytes contained in the
command to the addressed block, provided that the block is available and not write-
protected. Data bytes are transmitted with the least significant byte first, and each byte is
transmitted with the least significant bit first.
The address byte gives access to the 16 blocks of the SRT512 (addresses 0 to 15).
Write_block commands issued with a block address above 15 will not be interpreted and the
SRT512 will not return any response, except for the System area located at address 255.
The result of the Write_block command is submitted to the addressed block. See the
following paragraphs for a complete description of the Write_block command:
●
Figure 13: Lockable EEPROM area (addresses 0 to 4)
●
Figure 14: Binary counter (addresses 5 to 6).
●
Figure 16: EEPROM (addresses 7 to 15).
The Write_block command does not give rise to a response from the SRT512. The reader
must check after the programming time, tW, that the data was correctly programmed. The
SRT512 must have received a Select() command and be switched to Selected state before
any Write_block command can be accepted. All Write_block commands sent to the SRT512
before a Select() command is issued, are ignored.
Figure 43.
Write_block request format
Request parameters:
●
Address: block addresses from 0 to 15, or 255
●
Data 1: Less significant data byte
●
Data 2: Data byte
●
Data 3: Data byte
●
Data 4: Most significant data byte.
Figure 44.
Write_block response format
Figure 45.
Write_block frame exchange between reader and SRT512
SOF
Data 1
CRCL
CRCH
EOF
AI07687c
8 bits
Data 2Data 3
Data 4
8 bIts8 bIts8 bIts8 bIts8 bIts
Write_block
Address
09h
8 bIts
AI07680b
No response
Data 1
AI13514d
Data 2Data 3 Data 4
Reader
SRT512
CRCL CRCH EOF
SOF
09h
Address
No response



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com