V7.1 1/08

4

1

2

3

4

5, 6

7

8

Software Installation

Installation instructions for models 42266 and 42276

Note: The software program and USB driver must both be

installed in order for the printer/meter to communicate with

the software. Please follow the installation instructions below.

1.

Place the supplied software CD in the PC CD-ROM. The Data Acquisition Setup

Menu will appear (see below).

2.

Click on “Install Software” to start the installation of the software.

3.

Click “Finish” to install the program to the default location or click on “Change” to

enter the directory in which to install the program.

4.

Follow the on-screen instructions to complete the program installation.

5.

Click “Install USB” and follow the on screen instructions to complete the USB driver

installation.

LNK PC Link Screen

The printer must be set to PC communication on the Link

screen before communication can occur.

1.

Turn the printer on

2.

Press the Menu button until the LNK screen

appears.

3.

Press the Up or Down button to select the logger or

the printer memory.

4.

Press Enter when the selection is complete

Installation Instructions for models 42265 and 42275

Place the supplied software CD in the PC CD-ROM drive.

1.

Click on “Install Software” to start the installation of the software.

2.

Click “Finish” to install the program to the default location or click

on “Change” to enter the directory in which to install the program.

3.

Follow the on-screen instructions to complete the program

installation.

Setup menu description

1.

Install USB driver

2.

Exit: Close the Setup Menu

3.

Software Version number

4.

Software installation

5.

Open the English manual

6.

Open the Spanish manual

7.

Visit the Extech website

8.

View all items on the CD-ROM