User Manual for Model RHT10 Version 1.3 March 2007

4

Operation

DATALOGGER SOFTWARE INSTALLATION

Install the supplied Windows PC Datalogger Software by placing the supplied program disk in the PC CD-ROM

drive. If the installation program does not automatically open and provide on-screen prompts, double click the

SETUP.EXE file included on the program disk. Follow the on-screen prompts to complete the installation. Before

running the Datalogger software please connect the Logger to the PC and install the USB Driver software as

described in the next section.

CONNECTING THE LOGGER TO THE PC and INSTALLING THE DRIVER SOFTWARE

Plug the Logger into an available USB port on the PC. If this is the 1

particular port on the PC, the following screen will appear:

Select the ‘recommended’ installation (make sure the program disk is still in the PC CD-ROM drive) and follow the

on-screen prompts to complete the driver installation. If this is a repeat connect of the Logger to the USB port, the

driver installation process will be automatically skipped.

RUNNING THE DATALOGGER SOFTWARE

With the Logger connected to the PC, Double click the DATALOGGER icon to launch the program. The main

software screen will appear with the MENU BAR icons described below.

MENU BAR

From left to right the menu bar icons represent DATA DOWNLOAD, LOGGER SETUP, FILE OPEN, FILE

SAVE-AS, FILE PRINT, and ZOOM. In addition, the FILE, VIEW, LINK, and HELP pull-down menus are available

here. All will be discussed in the following paragraphs. Start by setting up the Logger as explained in the following

section.