AM600 V2.0 6/07

5

Resistance Measurements

1.

Insert the black test lead into the negative COM terminal and

the red test lead into the OHMS positive terminal.

2.

Set the Range switch to the X1Ω or X100Ω position as

needed.

3.

Set the Pointer Lock switch is set to the right-most position so

that the pointer may freely move.

4.

With the test leads open, adjust the meter zero so that the

pointer is over the

∞ symbol.

5.

Touch the test lead tips together and adjust the 0 Ohms adjust

6.

Touch the test probe tips across the circuit or component under

test.

7.

The analog display pointer will indicate the resistance reading.

Temperature Measurements

Zero procedure (fig. 1)

1.

Insert the temperature probe black plug into the COM terminal and the Probe tip

into the V Ω terminal.

2.

Adjust the pointer for a 0 Ω scale reading

Measurements (fig. 2)

1.

Insert the temperature probe black plug into the COM terminal and the red plug

into the V Ω terminal.

2.

Place the temperature probe into the area to be tested.

3.

Read the temperature on the °C or °F temperature scale

fig. 1

fig. 2