7

Chapter 3

System Configuration

This chapter details the system parts and components with figures.

Sections include

System Major Parts

3.1 System Major Parts

Refer to the following diagrams to identify the major parts that make up

the BBS-2003. The frame and accessories of this computer are mainly

made of metals. The use of such mixture not only increases the

hardness and fireproof but also beautify the tinge and coating of the

finished unit.

3.1.1 Major Parts Description

1. System Fan: For sufficient airflow inside the system, two 5cm

system fan is installed on the power supply bracket to

dispense the system heat and stabilize the system during

operation.

2. Multi I/O Board: This is the peripheral port that comes in one

model. For BBS-2003, the port outlets include CRT, RJ-45,

two COM, two USB, keyboard and mouse. It also provides two

PCI expansion slots.

3. Power Supply: The power supply adapted in this computer is a

70W power that meets FCC/UL Class B specification.

4. Hard Disk Drive: This is the hard disk drive unit of the system.

5. System control board: System engine board used for BBS-2003

is BOSER’s HS-6237 or other half-size SBC.

6. Power Switch: This switch on front panel controls the system

power on/off.