DS-PROBLADE-1 Oct ’07

©2007 RF Solutions Ltd, www.rfsolutions.co.uk

Page 2

PRO

Professional Radio Control

Blade

Custom systems

We regularly supply pre-wired / bespoke systems; please contact our sales department for further assistance

Receiver Unit

The receiver consists of interchangeable modules which are connected via ribbon cables. (as shown below)

Antenna

The Antenna is held internally, this is to save drilling the enclosure on the top. This may have some effect to

the range for specific applications which may require the antenna externally mounted. At all times please

ensure that the antenna is pointing in a vertical direction and away from high interference sources.

PRO-BLADE – 8 CHANNEL RECEIVER

Ordering Information

Part Number

Description

Range**

(Metres)

Freq

(MHz)

Relay Outputs

(each @230Vac)

PRO-BLADE8

8 channel Remote Control System

500

434.525

8 x 12A

** Range stated is optimum, direct line of sight. In worst conditions this can be reduced significantly

Information contained in this document is believed to be accurate, however no representation or warranty is given and R.F. Solutions Ltd. assumes no liability with respect to the accuracy of such information.

Use of R.F.Solutions as critical components in life support systems is not authorised except with express written approval from R.F.Solutions Ltd.