AD9548SLASHPCBZ datasheet(105/112 Pages) AD

105 / 112 page

AD9548

Rev. 0 | Page 105 of 112

POWER SUPPLY PARTITIONS

The AD9548 features multiple power supplies, and their power

consumption varies with the AD9548 configuration. This

section provides information about which power supplies can

be grouped together and how the power consumption of each

block varies with frequency.

The numbers quoted here are for comparison only. Please refer

to the Specifications section for exact numbers. With each group,

bypass capacitors of 1 μF in parallel with 10 μF should be used.

Upon applying power to the device, internal circuitry monitors

the 1.8 V digital core supply and the 3.3 V digital I/O supply.

When these supplies cross the desired threshold level, the device

generates an internal 10 μs reset pulse. This pulse does not

appear on the RESET pin.

3.3 V SUPPLIES

The 3.3 V supply domain consists of two main partitions, digital

(DVDD3) and analog (AVDD3). Take care to keep these two

supply domains separate.

Furthermore, the AVDD3 consists of two subdomains: the clock

distribution output domain (Pin 31, Pin 37, Pin 38, and Pin 44)

and the rest of the AVDD3 supply connections. Generally, these

supply domains can be joined together. However, if an

application requires 1.8 V CMOS driver operation in the clock

distribution output block, then provide one 1.8 V supply

domain to power the clock distribution output block. Each

output driver has a dedicated supply pin, as shown in Table 153.

Table 153. Output Driver Supply Pins

Output Driver

Supply Pin

OUT0

OUT1

OUT2

OUT3

1.8 V SUPPLIES

The 1.8 V supply domain consists of two main partitions, digital

(DVDD) and analog (AVDD). These two supply domains must

be kept separate.

AD9548/PCBZ 데이터시트(PDF) 105 Page - Analog Devices